BLog
Critter Quitter® News
Memorial Day
We hope all have a great Memorial Day.
Change on order page
We have modified our order page so that its now measured in outside flashing diameter, not inside pipe diameter. This should eliminate confusion. So when ordering, simply measure your flashing diameter and order the unit that fits.
Spring Rains
Its been pouring here in central Florida. its a really good idea if you have gutters to check them and get them cleaned, if they are plugged its going to rot out your roof. And certainly, check your vent flashing. If its chewed up this means a leak is taking place,...
Standard Sloped Unit Angle
We cut our standard sloped units to 25 degrees, which is basically a 5 3/4 pitch give or take. This will fit any roof that you can walk on easily except really flat. If its really steep, 38 degrees or more, a custom unit probably needs to be ordered, and it should be...
M Unit Purchases
We have had good success recently selling the large M units designed for cast iron 4 inch pipe vents. These will not be found on any modern homes, rather homes built prior to 1950. PVC hadn't been invented, and cast iron pipe was the cheapest pipe around and 4 inch...
CQs can be used on undamaged vents
Since the internal componants do not enter the vent, a CQ can be installed on an undamaged vent to protect it from future attack. It also adds a nice look to a roof. So if you got a new house or just re-roofed your home consider a CQ installation to protect it for life.